RHS & SHS Weight
Mass, area, painting surface and properties of square and rectangular hollow sections, with the correct corner radii for hot-finished or cold-formed tubes.
Inputs
DIMENSIONS IN mm
- EN 10210-2:2019, hot-finished hollow sections (ro = 1.5t, ri = 1.0t for property calculation)
- EN 10219-2:2019, cold-formed hollow sections (corner radii by thickness band)
Preliminary engineering estimate. Results are calculated from nominal geometry and the assumptions listed. They are not a certified design, procurement quantity or code-compliance check, and must be verified by a qualified engineer against the governing specification.
Related tools
Continue calculating
Steel Section Weight & Properties
Mass, area, painting surface and section properties for IPE, HEA, HEB, HEM sections or a custom welded I-section.
Open calculatorCHS & Pipe Weight
Mass, area, external and internal surface, and section properties of circular hollow sections and pipe.
Open calculatorSteel Plate & Flat Bar Weight
Mass and painting surface of rectangular plates, base plates, stiffeners and flat bar, with deduction for bolt holes.
Open calculator