Fillet Weld Metal & Consumables
Throat, leg, deposited weld metal and consumable estimate for continuous or intermittent fillet welds, equal or unequal legs.
Inputs
DIMENSIONS IN mm
- EN 1993-1-8:2005 §4.5, effective throat a and minimum throat (a ≥ 3 mm)
- EN ISO 2553:2019, welding symbols (designation by a or z)
- Deposition efficiency: indicative industry ranges; replace with consumable manufacturer data
Preliminary engineering estimate. Results are calculated from nominal geometry and the assumptions listed. They are not a certified design, procurement quantity or code-compliance check, and must be verified by a qualified engineer against the governing specification.
Related tools
Continue calculating
Butt Weld Metal & Consumables
Groove area, reinforcement, deposited metal and consumables for square, V, X, bevel and K butt-weld preparations, with an automatic single-V vs double-V comparison.
Open calculatorSteel Section Weight & Properties
Mass, area, painting surface and section properties for IPE, HEA, HEB, HEM sections or a custom welded I-section.
Open calculatorCHS & Pipe Weight
Mass, area, external and internal surface, and section properties of circular hollow sections and pipe.
Open calculator