Butt Weld Metal & Consumables
Groove area, reinforcement, deposited metal and consumables for square, V, X, bevel and K butt-weld preparations, with an automatic single-V vs double-V comparison.
Inputs
DIMENSIONS IN mm
- EN ISO 9692-1:2013, Recommended joint preparations (types and symbols)
- EN ISO 5817:2023, Quality levels for imperfections (reinforcement limits; not checked here)
- Deposition efficiency: indicative industry ranges; replace with consumable data
Preliminary engineering estimate. Results are calculated from nominal geometry and the assumptions listed. They are not a certified design, procurement quantity or code-compliance check, and must be verified by a qualified engineer against the governing specification.
Related tools
Continue calculating
Fillet Weld Metal & Consumables
Throat, leg, deposited weld metal and consumable estimate for continuous or intermittent fillet welds, equal or unequal legs.
Open calculatorSteel Section Weight & Properties
Mass, area, painting surface and section properties for IPE, HEA, HEB, HEM sections or a custom welded I-section.
Open calculatorCHS & Pipe Weight
Mass, area, external and internal surface, and section properties of circular hollow sections and pipe.
Open calculator